Thermal Conversion of Methane to Formaldehyde Promoted by Gold in AuNbO3+ Cluster Cations

In addition to generation of a methyl radical, formation of a formaldehyde molecule was observed in the thermal reaction of methane with AuNbO₃⁺ heteronuclear oxide cluster cations. The clusters were prepared by laser ablation and mass‐selected to react with CH₄ in an ion‐trap reactor under thermal collision conditions. The reaction was studied by mass spectrometry and DFT calculations. The latter indicated that the gold atom promotes formaldehyde formation through transformation of an Au?O bond into an Au?Nb bond during the reaction.     

Solvent‐free Liquid Crystals and Liquids from DNA

As DNA exhibits persistent structures with dimensions that exceed the range of their intermolecular forces, solid‐state DNA undergoes thermal degradation at elevated temperatures. Therefore, the realization of solvent‐free DNA fluids, including liquid crystals and liquids, still remains a significant challenge. To address this intriguing issue, we demonstrate that combining DNA with suitable cationic surfactants, followed by dehydration, can be a simple generic scheme for producing these solvent‐free DNA fluid systems. In the anhydrous smectic liquid crystalline phase, DNA sublayers are intercalated between aliphatic hydrocarbon sublayers. The lengths of the DNA and surfactant are found to be extremely important in tuning the physical properties of the fluids. Stable liquid‐crystalline and liquid phases are obtained in the ?20 °C to 200 °C temperature range without thermal degradation of the DNA. Thus, a new type of DNA‐based soft biomaterial has been achieved, which will promote the study and application of DNA in a much broader context.     

煤与生物质混烧灰荷电特性研究

对玉米秸分别与两种煤以不同比例混烧生成的混烧灰进行了荷电特性研究。利用法拉第杯荷电量检测系统和静电低压撞击器(ELPI)测量了混烧灰的总体荷质比及分级荷质比,并借助于成分分析及形貌分析结果讨论了其影响机理。结果表明,随着生物质掺入量在混烧燃料中的增加,混烧灰的成分组成发生变化,使得其介电常数变大,比电阻增大,表面吸附能力增强,从而使混烧灰的总体荷质比有一定的上升趋势。对混烧灰的分级荷质比测量结果表明,排除灰样粒径的影响,生物质的掺入使得混烧灰的荷电能力得以增强,但影响相对较小,颗粒粒径是影响混烧灰荷电能力的主要因素。     

Simultaneous quantification of leukotrienes and hydroxyeicosatetraenoic acids in cell culture medium using liquid chromatography/tandem mass spectrometry

Leukotrienes (LTs) and hydroxyeicosatetraenoic acids (HETEs) are important bioactive lipid mediators that participate in various pathophysiological processes. To advance understanding of the mechanisms that regulate these mediators in physiological and pathological processes, an analytical method using liquid chromatography/tandem mass spectrometry for the simultaneous quantification of LTB₄, LTC₄, LTD₄, LTE₄, 5‐HETE_, 8‐HETE, 12‐HETE and 15‐HETE in cell culture media was developed. A Supel?‐Select HLB solid‐phase extraction cartridge was used for sample preparation. The compounds were separated on a C₁₈ column using gradient elution with acetonitrile–water–formic acid (20:80:0.1, v/v/v) and acetonitrile–formic acid (100:0.1, v/v). The calibration curves of LTB₄, LTD₄, LTE₄ and HETEs were linear in the range of 0.025–10 ng/mL, and the calibration curve of LTC₄ was linear in the range of 0.25–10 ng/mL. Validation assessment showed that the method was highly reliable with good accuracy and precision. The stability of LTs and HETEs was also investigated. Using the developed method, we measured LTs and HETEs in the culture supernatant of the human mast cell line HMC‐1. The present method could facilitate investigations of the mechanisms that regulate the production, release and signaling of LTs and HETEs. Copyright © 2014 John Wiley & Sons, Ltd.     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Salt effects on macrophase separations in non‐stoichiometric mixtures of oppositely charged macromolecules: Theory and experiment

In the field of biological applications, polyelectrolyte complexes are proposed to encapsulate bioactive compounds, to deliver drugs, and also to transfect genes into cells under the name of polyplexes. Complex formation is obtained by addition of a polycation solution into a polyanion solution or vice‐versa. This work proposes a theoretical approach to describe complex formation in the case of non‐stoichiometric mixtures of oppositely charged macroions having different degrees of ionization and different degrees of polymerization under different salt conditions. In a second part, comparison was made with experimental data collected when a weak polybase, namely poly(l ‐lysine) under its bromide form was added stepwise to solutions of various polyanions under their sodium salt form, namely poly(l ‐lysine citramide imide), poly(l ‐lysine citramide), and poly(β‐malic acid), the latter lacking hydroxyl groups attached to the main chain. The stability of stroichiometric complexes made of poly(l ‐lysine) and poly(l ‐lysine citramide) having different molecular masses is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1717–1730     

Off-center impact of an elastic column by a rigid mass

Based on the Timoshenko beam model the equations of motion are obtained for large deflection of off-center impact of a column by a rigid mass via Hamilton's principle. These are a set of coupled nonlinear partial differential equations. The Newmark time integration scheme and differential quadrature method are employed to convert the equations into a set of nonlinear algebraic equations for displacement components. The equations are solved numerically and the effects of weight and velocity of the rigid mass and also off-center distance on deformation of the column are studied.     

Three Short Stories about Hexaarylbenzene–Porphyrin Scaffolds

A feasible two‐step synthesis and characterization of a full series of hexaarylbenzene (HAB) substituted porphyrins and tetrabenzoporphyrins is presented. Key steps represent the microwave‐assisted porphyrin condensation and the statistical Diels–Alder reaction to the desired HAB‐porphyrins. Regarding their applications, they proved to be easily accessible and effective high molecular mass calibrants for (MA)LDI mass spectrometry. The free‐base and zinc(II) porphyrin systems, as well as the respective tetrabenzoporphyrins, demonstrate in solid state experiments strong red‐ and near‐infrared‐light emission and are potentially interesting for the application in “truly organic” light‐emitting devices. Lastly, they represent facile precursors to large polycyclic aromatic hydrocarbon (PAH) substituted porphyrins. We prepared the first tetra‐hexa‐peri‐hexabenzocoronene substituted porphyrin, which represents the largest prepared PAH‐porphyrin conjugate to date.     

A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

A rapid and effective preparative procedure has been evaluated for the accurate determination of low-energy (40–200 keV) gamma-emitting radionuclides (²¹⁰Pb, ²³⁴Th, ²²⁶Ra, ²³⁵U) in uranium ores and uranium ore concentrates (UOCs) using high-resolution gamma ray spectrometry. The measurement of low-energy gamma photons is complicated in heterogeneous samples containing high-density mineral phases and in such situations activity concentrations will be underestimated. This is because attenuation corrections, calculated based on sample mean density, do not properly correct where dense grains are dispersed within a less dense matrix (analogous to a nugget effect). The current method overcomes these problems using a lithium tetraborate fusion that readily dissolves all components including high-density, self-attenuating minerals/compounds. This is the ideal method for dissolving complex, non-volatile components in soils, rocks, mineral concentrates, and other materials where density reduction is required. Lithium borate fusion avoids the need for theoretical efficiency corrections or measurement of matrix matched calibration standards. The resulting homogeneous quenched glass produced can be quickly dissolved in nitric acid producing low-density solutions that can be counted by gamma spectrometry. The effectiveness of the technique is demonstrated using uranium-bearing Certified Reference Materials and provides accurate activity concentration determinations compared to the underestimated activity concentrations derived from direct measurements of a bulk sample. The procedure offers an effective solution for initial nuclear forensic studies where complex refractory minerals or matrices exist. It is also significantly faster, safer and simpler than alternative approaches.     

Influence of Molar Mass and Concentration on the Thermogelation of Methylcelluloses

In this study, thermogelation of methylcelluloses is investigated in relation to the molar mass and concentration in aqueous medium. A large hysteresis between heating and cooling ramps was observed whatever the conditions. The heating process in particular was studied to analyze the two steps of gelation using rheometry. At low temperature, in the sol state, viscosity depends on the concentration and molar mass. Over 30°C a gel-like behavior was observed including two steps (the second step is a strong gel with phase separation) having storage moduli that are nearly independent of polymer molar mass but are directly related to polymer concentration.